Dexcom G7

Fundamental por adelantado

En la primavera de 2022, Dexcom G7 recibió el certificado CE y se vendió a finales de octubre del mismo año.

Cabe destacar que el sistema Dexcom G7, en comparación con Dexcom G6, no suaviza los valores, ni en la app, ni en el lector. Más detalles al respecto aquí.

G7 english

1. Aplicación Dexcom G7 parcheada (DiAKEM)

Note: AAPS 3.2.0.0 or higher is required!

Instale una nueva aplicación parcheada de G7 e inicia el sensor.

A patched Dexcom G7 app (DiAKEM) gives access to the Dexcom G7 data. This is not the BYODA app as this app can not receive G7 data at the moment.

Uninstall the original Dexcom app if you used it before (A running sensor session can be continued - note the sensor code before removal of the app!)

Download and install the patched.apk here.

Enter sensor code in the patched app.

Follow the general recommendations for CGM hygiene and sensor placement found here.

After the warm-up phase, the values are displayed as usual in the G7 app.

Configuración en AAPS

For the configuration in AAPS

  • Select “BYODA” in in ConfigBuilder, BG Source - even if it is not the BYODA app!

  • If AAPS does not receive any values, switch to another BG source and then back to “BYODA” to invoke the query for approving data exchange between AAPS and BYODA.

2. xDrip+ (direct connection to G7)

  • Sigue las instrucciones aquí: xDrip+ G7

  • Select xDrip+ in ConfigBuilder, BG Source.

  • Adjust the xDrip+ settings according to the explanations on the xDrip+ settings page xDrip+ settings

3. xDrip+ (companion mode)

  • Download and install xDrip+: xDrip

  • As data source in xDrip+ «Companion App» must be selected and under Advanced Settings > Bluetooth Settings > «Companion Bluetooth» must be enabled.

  • Select xDrip+ in in ConfigBuilder, BG Source.

  • Adjust the xDrip+ settings according to the explanations on the xDrip+ settings page xDrip+ settings