Pompe à insuline Diaconn G8

Appairage Bluetooth de la pompe à insuline

• Click on the hamburger menu in the top left corner.

  

• Click on Config Builder.

  

• After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).

  

• Choose Selected pump.

  

• Select your insulin pump’s model number once it appears in the list.

  

• There are two options to check your model number:

  1. Les 5 derniers chiffres du numéro SN au dos de la pompe.

  2. Click on O button > Information > BLE > Last 5 digits.

  {image} ../images/DiaconnG8/DiaconnG8_06.jpg     :alt: check model no.

• Once you select your pump, a window appears asking for a pin code. Entrez le code PIN affiché sur votre pompe pour terminer la connexion.

  

Contrôle de l’état de la pompe et synchronisation des journaux

• Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.

  

Dépannage Bluetooth

What to do in the case of an unstable Bluetooth connection with the pump.

Méthode 1) Vérifiez à nouveau la pompe une fois la connexion à AAPS terminée.

• Click on the 3 dots button on the top right.

  

• Click on Exit.

  

Méthode 2) Si la première méthode ne fonctionne pas, déconnectez Bluetooth puis reconnectez-vous.

• Press and hold the Bluetooth button at the top for about 3 seconds.

  

• Click on the Setting button on the paired Diaconn G8 Insulin pump.

  

• Unpair.

  

• Repeat the Bluetooth pairing process for the pump (see above).

Informations complémentaires

Réglage des options de pompe Diaconn G8

• Config manager > pump > Diaconn G8 > Settings

• DIACONN G8 at the top> 3 dots button on the top right > Diaconn G8 Preferences

• If the Log reservoir change option is activated, the relevant details are automatically uploaded to the careportal when an “Insulin Change” event occurs.

• If the Log needle change option is activated, the relevant details are automatically uploaded to the careportal when a “Site Change” event occurs.

• If the Log tube change option is activated, the relevant details are automatically uploaded to the careportal when a “Tube Change” event occurs.

• If the Log battery change option is activated, the relevant details are automatically uploaded to the careportal when a “Battery Change” event occurs, and the PUMP BATTERY CHANGE button in the ACTION tab is deactivated. (Note: Pour changer la pile, veuillez arrêter toutes les fonctions d’injection en cours avant de continuer.)

Fonction Bolus Étendu

• If you use extended bolus it will disable closed loop.

• See this page for details why extended bolus does not work in a closed loop environment.