DanaRS and Dana-i Pump

These instructions are for configuring the app and your pump if you have a DanaRS from 2017 onwards or the newer Dana-i. Jei turite DanaR pompą, skaitykite DanaR insulino pompa.

New Dana RS firmware v3 can be used from AAPS version 2.7 onwards.

New Dana-i can be used from AAPS version 3.0 onwards.

  • In DanaRS/i pump „BASAL A“ is used by the app. Existing data gets overwritten.

Pompos susiejimas

  • On AAPS homescreen click hamburger menu on the top left corner and go to Config Builder.

  • In pump section select ‚Dana-i/RS‘.

  • Click on gear wheel to get directly to the pump settings or return to homescreen.

    AAPS config builder Dana-i/RS

  • Go to ‚DANA-i/RS‘ tab.

  • Select preferences menu by tapping the 3 dots in the top right.

  • Select ‚Dana-i/RS Preferences‘.

  • Click on „Selected pump“.

  • In the pairing window click on the entry for your pump.

    AAPS pair Dana-i/RS

  • You have to confirm the pairing on the pump! That’s just the way you are used to from other bluetooth pairings (i.e. smartphone and car audio).

    Dana RS confirmation pairing

  • Follow the pairing process based on the type and firmware of your pump:

    • For DanaRS v1 select pump password in preferences and set your password.

    • For DanaRS v3 you have to type 2 sequences of numbers and letters displayed on pump to AAPS pairing dialog.

    • For Dana-i standard Android pairing dialog appear and you have to enter 6-digit number displayed on pump.

  • Select Bolus Speed to change the default bolus speed used (12sec per 1u, 30sec per 1u or 60sec per 1u).

  • Set basal step on pump to 0.01 U/h using Doctors menu (see pump user guide).

  • Set bolus step on pump to 0.05 U/h using Doctors menu (see pump user guide).

  • Įgalinkite ištęstus bolusus pompoje

Numatytasis slaptažodis

  • Pompos DanaRS su programine įranga v1 ir v2 numatytasis slaptažodis yra 1234.

  • For DanaRS with firmware v3 or Dana-i the default password is derived from the manufacturing date and calculates as MMDD where MM is the month and DD is the day, the pump was produced (i.e. ‚0124‘ representing month 01 and day 24).

    • From MAIN MENU select REVIEW then open SHIPPING INFORMATION from the sub menu

    • Number 3 is manifacturing date.

    • For v3/i this password is used only for locking menu on pump. It’s not used for communication and it’s not necessary to enter it in AAPS.

Slaptažodžio keitimas pompoje

  • paspauskite OK mygtuką pompoje

  • Pagrindiniame meniu pasirinkite „OPTION“ (judėkite dešinėn kelis kartus paspausdami rodyklės mygtuką)

    DanaRS pagrindinis meniu

  • Meniu Parinktys pasirinkite „USER OPTION“

    DanaRS parinkčių meniu

  • Rodyklės mygtuku slinkite žemyn iki „11. password“

    DanaRS 11. Slaptažodis

  • Paspauskite OK senojo slaptažodžio įvedimui.

  • Enter old password (Default password see above) and press OK

    DanaRS Įveskite seną slaptažodį

  • Jei įvedamas neteisingas slaptažodis, nebus jokio pranešimo apie klaidą!

  • Įveskite naują slaptažodį (Keiskite numerius mygtukais + ir - / Perkelkite į dešinę rodyklės mygtuku).

    DanaRS Naujas slaptažodis

  • Patvirtinkite paspausdami OK mygtuką.

  • Press OK to save setting.

    DanaRS išsaugoti naują slaptažodį

  • Pereikite žemyn į „14. EXIT“ and press OK to exit.

    DanaRS Išėjimas

Specifinės DanaRS klaidos

Klaida suleidžiant insuliną

In case the connection between AAPS and Dana RS is lost during bolus insulin delivery (i.e. you walk away from phone while Dana RS is pumping insulin) you will see the following message and hear an alarm sound.

Alarm insulin delivery

  • Dažniausiai tai tik ryšio klaida ir visas insulino kiekis sėkmingai suleidžiamas.

  • Patikrinkite, ar suleistas teisingas insulino kiekis pompos istorijoje (pačioje pompoje arba AAPS skirtuke Dana > Pompos istorija > Bolusai.

  • Delete error entry in treatments tab if you wish.

  • Kito programos ir pompos susijungimo metu suleisto insulino kiekis bus patikrintas ir įrašytas. Galite tiesiog palaukti kito susijungimo arba jį pagreitinti paspaudę BT piktogramą Dana skirtuke.

Specialūs veiksmai keičiant telefoną

When switching to a new phone the following steps are necessary:

  • Export settings on your old phone

  • Transfer settings from old to new phone

DanaRS v1

  • Manually pair Dana RS with the new phone

  • As pump connection settings are also imported AAPS on your new phone will already „know“ the pump and therefore not start a bluetooth scan. Therefore new phone and pump must be paired manually.

  • Install AAPS on the new phone.

  • Import settings on your new phone

DanaRS v3, Dana-i

  • Start pairing procedure like decribed above.

  • Sometimes it may be necessary to clear pairing information in AAPS by long-click BT icon on Dana-i/RS tab.

Keliavimas per skirtingas laiko juostas su DanaRS pompa

For information on traveling across time zones see section Timezone traveling with pumps.