Release notes

Please follow the instructions in the update manual. Daar vind je ook oplossingen voor veelvoorkomende problemen.

Zodra een nieuwe update beschikbaar is zie je de volgende melding:

Update info

Dan heb je 60 dagen om bij te werken. If you do not update within these 60 days AAPS will fall back to LGS (low glucose suspend - see glossary) as in objective 6.

Als je daarna nog eens 30 dagen wacht met bijwerken (dus 90 dagen vanaf de datum dat de nieuwe versie beschikbaar kwam) zal AAPS overschakelen naar Open Loop.

Deze harde beperkingen zijn uiteraard niet bedoeld om je te pesten, maar zijn er om veiligheidsredenen. Nieuwe versies van AndroidAPS bevatten niet alleen nieuwe handige functies, maar ook belangrijke veiligheidsupdates. Therefore it is necessary that every user updates a.s.a.p.. Helaas zijn er nog steeds signalen dat sommige gebruikers een hele oude versie van hun app gebruiken, dus dit is een poging om de veiligheid voor individuele gebruikers en de hele doe-het-zelf loop-gemeenschap te verbeteren.

Android version and AAPS version

If your smartphone uses an Android Version older than Android 9 you will not be able to use AAPS v3 and up as it requires at least Android 9.

In order to allow users with older Android to use older version of AAPS new versions were pushed which only change version verification. No other improvements are included.

Android 9 and up

Android 8

Android 7

Version 3.1.0

Release date: 19-07-2022

Important hints

  • after update uninstall Wear app and install new version

  • Omnipod users: update on pod change !!!

Changes

  • fixed issues from 3.0 version

  • fix application freezing @MilosKozak

  • fixed DASH driver @avereha

  • fixed Dana drivers @MilosKozak

  • huge UI improvement, cleanup and unification, migration to material design, styles, white theme, new icons. @Andries-Smit @MilosKozak @osodebailar @Philoul

  • widget @MilosKozak

  • Aidex CGM support @andyrozman @markvader (Pumpcontrol only)

  • Watch Wear OS tiles <../Configuration/Configuration/Watchfaces.mdl#wear-os-tiles>, translations @Andries-Smit

  • Wear code refactored. Not backward compatible anymore @MilosKozak

  • a11y improvements @Andries-Smit

  • new protection option PIN @Andries-Smit

  • allow graph scale from menu @MilosKozak

  • more statistics available @MilosKozak

  • MDI plugin removed in favor of VirtualPump

  • new automation action: StopProcessing (following rules)

Version 3.0.0

Release date: 31-01-2022

Important hints

  • Minimum Android version is 9.0 now.

  • Data is not migrated to new database. Do not complain, it’s so huge change so it’s simply not possible. Thus after update IOB, COB, treatments etc. will be cleared. You have to create new profile switch and start with zero IOB and COB. Plan the update carefully!!! Best in situation without active insulin and carbs

  • Use the same version of AAPS and NSClient

Make sure to check and adjust settings after updating to 3.0 as described here.

Preparation steps

At least two days before update:

  • disable Dexcom bridge in Nightscout

  • if you are using G5/G6 and xDrip as a collector, you have to update xDrip to a nightly version newer than 14th January 2022

  • if you are using G5/G6 switching to BYODA as collector is recommended to take advantage of back-smoothing (you can still use xDrip for other purposes, xDrip can receive data from BYODA)

Changes

  • 100k lines changed, 105k new lines of code

  • Omnipod DASH support @AdrianLxM @avereha @bartsopers @vanelsberg

  • Dana-i support @MilosKozak

  • DiaconnG8 support

  • Glunovo support

  • Internal database upgraded to Room @MilosKozak @Tebbe @AdrianLxm @Philoul @andyrozman

  • Lot of code rewritten to Kotlin @MilosKozak

  • New internal interface for pump drivers

  • NSClient rewritten for better synchronization and more detailed customization @MilosKozak

    • Record deletion from NS is not allowed (only invalidation through NSClient)

    • Record modification from NS is not allowed

    • Sync setting available without engineering mode (for parents)

    • Ability to resync data

  • Profile switch behavior change. Now is distinguished between Profile Switch (something that user wants) and Profile change (when change is executed by pump) @MilosKozak @Tebbe

  • You can start activity temporary target during creation of profile switch @MilosKozak

  • NSProfile is gone, just local profile can be used. Local profile can be synced to NS. @MilosKozak.

  • Forgotten master password reset procedure @MilosKozak

  • User actions tracing @Philoul

  • New automation TempTargetValue trigger @Philoul

  • New automation Careportal action @Philoul

  • Add Bolus reminder in Carbs Dialog @Philoul

  • Bolus Wizard improvement

  • UI improvements @MilosKozak

  • New user buttons for automations @MilosKozak

  • New automation layout @MilosKozak

  • History browser updated and fixed @MilosKozak

  • Objective9 removed @MilosKozak

  • Fixed bug associated to unstable CGM data @MilosKozak

  • DanaR and DanaRS communication improvement @MilosKozak

  • CircleCI integration @MilosKozak

  • Files location change:

    • /AAPS/extra (engineering mode)

    • /AAPS/logs /AAPS/exports

    • /AAPS/preferences

Versie 2.8.2

Release datum: 23-01-2021

  • Please see also important hints for version 2.8.1.1 below.

Changes

  • stability improvements

  • more tweaking for Android 8+

  • improved icons

  • watch improvements

  • NSClient fixes

  • Bolus advisor now works with Pumpcontrol and NSClient

Versie 2.8.1.1

Release datum: 12-01-2021

(important-hints-2-8-1-1)

Important hints

  • Option NS_UPLOAD_ONLY has been forced ON for all 2.8.1 users.

  • If you use NSClient to enter TT, carbs or profile switches you must turn it off in AAPS but only in case your synchronization is working well (ie. you don’t see unwanted data changes like self modification of TT, TBR etc).

  • ATTENTION: DO NOT do this if you have any other app handle treatments ( like xDrip broadcast/upload/sync…).

  • NS_UPLOAD_ONLY can only be turned off if engineering mode is enabled.

Major changes

  • RileyLink, Omnipod and MDT pump improvements and fixes

  • forced NS_UPLOAD_ONLY

  • fix for SMB & Dexcom app

  • watchface fixes

  • crash reporting improved

  • gradle reverted to allow direct watchface instalation

  • automation fixes

  • RS driver improvement

  • various crashes fixed

  • UI fixes and improvements

  • new translations

Versie 2.8.0

Release datum: 01-01-2021

Important hints

  • Minimum Android version is 8.0 now. For older Android versions you can still use 2.6.1.4 from old repo.

  • Objectives have changed. Finish not completed objectives before update.

  • Repository location still on https://github.com/nightscout/AndroidAPS . If you are not familiar with git the easiest way for update is remove directory with AndroidAPS and do a new clone.

  • Please use Android Studio 4.1.1 or newer to build the apk.

Belangrijkste nieuwe functies

  • Omnipod Eros support @bartsopers @andyrozman @ktomy @samspycher @TeleRiddler @vanelsberg @eurenda and special thanks to @ps2 @itsmojo, everybody else involved in the Loop driver for Omnipod and @jlucasvt from GetRileyLink.org

  • bolus advisor & eating reminder @MilosKozak

  • New watchface @rICTx-T1D

  • Dana RS connection improvements @MilosKozak

  • Removed “Unchanged CGM values” behavior in SMB for Dexcom native app

  • New Low Ressolution Skin

  • New “Pregnant” patient type @Brian Quinion

  • New NSClient tablet layout @MilosKozak

  • NSClient transfer insulin, senstivity and display settings directly from main AAPS @MilosKozak

  • Preferences filter @Brian Quinion

  • New pump icons @Rig22 @@teleriddler @osodebailar

  • New insulin type Lyumjev

  • SetupWizard improvements @MilosKozak

  • Security improvements @dlvoy

  • Various improvements and fixes @AdrianLxM @Philoul @swissalpine @MilosKozak @Brian Quinion

Versie 2.7.0

Release datum: 24-09-2020

Make sure to check and adjust settings after updating to 2.7 as described here.

You need at least start objective 11 (in later versions objective 10!) in order to continue using Automation feature (all previous objectives must be completed otherwise starting Objective 11 is not possible). If for example you did not finish the exam in objective 3 yet, you will have to complete the exam before you can start objective 11. This will not effect other objectives you have already finished. Je behoudt alle reeds afgeronde doelen!

Belangrijkste nieuwe functies

Versie 2.6.1.4

Release datum: 04-05-2020

Please use Android Studio 3.6.1 or newer to build the apk.

Belangrijkste nieuwe functies

  • Insight: Disable vibration on bolus for firmware version 3 - second attempt

  • Otherwise is equal to 2.6.1.3. Update is optional.

Versie 2.6.1.3

Release datum: 03-05-2020

Please use Android Studio 3.6.1 or newer to build the apk.

Belangrijkste nieuwe functies

  • Insight: Disable vibration on bolus for firmware version 3

  • Otherwise is equal to 2.6.1.2. Update is optional.

Versie 2.6.1.2

Release datum: 19-04-2020

Please use Android Studio 3.6.1 or newer to build the apk.

Belangrijkste nieuwe functies

  • Fix crashing in Insight service

  • Otherwise is equal to 2.6.1.1. If you are not affected by this bug you don’t need to upgrade.

Versie 2.6.1.1

Release datum: 06-04-2020

Please use Android Studio 3.6.1 or newer to build the apk.

Belangrijkste nieuwe functies

  • Resolves SMS CARBS command issue while using Combo pump

  • Otherwise is equal to 2.6.1. If you are not affected by this bug you don’t need to upgrade.

Versie 2.6.1

Release datum: 21-03-2020

Please use Android Studio 3.6.1 or newer to build the apk.

Belangrijkste nieuwe functies

  • Allow to enter only https:// in NSClient settings

  • Fixed BGI displaying bug on watches

  • Fixed small UI bugs

  • Fixed Insight crashes

  • Fixed future carbs with Combo pump

  • Fixed LocalProfile -> NS sync

  • Insight alerts improvements

  • Improved detection of boluses from pump history

  • Fixed NSClient connection settings (wifi, charging)

  • Fixed sending of calibrations to xDrip

Versie 2.6.0

Release datum: 29-02-2020

Please use Android Studio 3.6.1 or newer to build the apk.

Belangrijkste nieuwe functies

  • Small design changes (startpage…)

  • Careportal tab / menu removed - more details here

  • New Local Profile plugin

    • Local profile can hold more than 1 profile

    • Profiles can be cloned and edited

    • Ability of upload profiles to NS

    • Old profile switches can be cloned to new profile in LocalProfile (timeshift and percentage is applied)

    • Veritical NumberPicker for targets

  • SimpleProfile is removed

  • Extended bolus feature - closed loop will be disabled

  • MDT plugin: Fixed bug with duplicated entries

  • Units are not specified in profile but it’s global setting

  • Added new settings to startup wizard

  • Different UI and internal improvements

  • Wear complications

  • New SMS commands BOLUS-MEAL, SMS, CARBS, TARGET, HELP

  • Fixed language support

  • Objectives: Allow to go back, Time fetching dialog

  • Automation: allow sorting

  • Automation: fixed bug when automation was running with disabled loop

  • New status line for Combo

  • GlucoseStatus improvement

  • Fixed TempTarget NS sync

  • New statistics activity

  • Allow Extended bolus in open loop mode

  • Android 10 alarm support

  • Tons on new translations

Versie 2.5.1

Release datum: 31-10-2019

Please note the important notes and limitations listed for version 2.5.0. * Fixed a bug in the network state receiver that lead to crashes with many (not critical but would waste a lot of energy re-calculating things). * New versioning that will allow to do minor updates without triggering the update-notification.

Versie 2.5.0

Release datum: 26-10-2019

Belangrijk:

  • Please use Android Studio Version 3.5.1 or newer to build the apk or update.

  • If you are using xDrip identify receiver must be set.

  • If you are using Dexcom G6 with the patched Dexcom app you will need the version from the 2.4 folder.

  • Glimp is supported from version 4.15.57 and newer.

Is this update for me? Currently is NOT supported

  • Android 5 and lower

  • Poctech

  • 600SeriesUploader

  • Patched Dexcom from 2.3 directory

Belangrijkste nieuwe functies

  • Internal change of targetSDK to 28 (Android 9), jetpack support

  • RxJava2, Okhttp3, Retrofit support

  • Old Medtronic pumps support (RileyLink need)

  • New Automation plugin

  • Allow to bolus only part from bolus wizard calculation

  • Rendering insulin activity

  • Adjusting IOB predictions by autosens result

  • New support for patched Dexcom apks (2.4 folder)

  • Signature verifier

  • Allow to bypass objectives for OpenAPS users

  • New objectives - exam, application handling (If you started at least objective “Starting on an open loop” in previous versions exam is optional.)

  • Fixed bug in Dana* drivers where false time difference was reported

  • Fixed bug in SMS communicator

Versie 2.3

Release datum: 25-04-2019

Belangrijkste nieuwe functies

  • Important safety fix for Insight (really important if you use Insight!)

  • Fix History-Browser

  • Fix delta calculations

  • Language updates

  • Check for GIT and warn on gradle upgrade

  • More automatic testing

  • Fixing potential crash in AlarmSound Service (thanks @lee-b !)

  • Fix broadcast of BG data (works independently of SMS permission now!)

  • New Version-Checker

Versie 2.2.2

Release datum: 07-04-2019

Belangrijkste nieuwe functies

  • Autosens fix: deactivate TT raises/lowers target

  • New translations

  • Insight driver fixes

  • SMS plugin fix

Versie 2.2

Release datum: 29-03-2019

Belangrijkste nieuwe functies

  • DST fix

  • Wear Update

  • SMS plugin update

  • Go back in objectives.

  • Stop loop if phone disk is full

Versie 2.1

Release datum: 03-03-2019

Belangrijkste nieuwe functies

  • Accu-Chek Insight support (by Tebbe Ubben and JamOrHam)

  • Status lights on main screen (Nico Schmitz)

  • Daylight saving time helper (Roumen Georgiev)

  • Fix processing profile names comming from NS (Johannes Mockenhaupt)

  • Fix UI blocking (Johannes Mockenhaupt)

  • Support for updated G5 app (Tebbe Ubben and Milos Kozak)

  • G6, Poctech, Tomato, Eversense BG source support (Tebbe Ubben and Milos Kozak)

  • Fixed disabling SMB from preferences (Johannes Mockenhaupt)

Overig

  • If you are using non default smbmaxminutes value you have to setup this value again

Versie 2.0

Release datum: 03-11-2018

Belangrijkste nieuwe functies

  • oref1/SMB support (oref1 documentation) Be sure to read the documentation to know what to expect of SMB, how it will behave, what it can achieve and how to use it so it can operate smoothly.

  • _Accu-Chek Combo pump support

  • Setup wizard: guides you through the process of setting up AndroidAPS

Instellingen die je moet aanpassen bij het overschakelen van AMA naar SMB

  • Objective 10 must be started for SMBs to be enabled (SMB tab generally shows what restrictions apply)

  • maxIOB now includes _all_ IOB, not just added basal. Dat betekent dus, wanneer je jezelf een maaltijdbolus van 8E hebt gegeven en maxIOB is 7E, dat er geen SMBs worden afgegeven totdat IOB onder de 7E is gezakt.

  • min_5m_carbimpact default has changed from 3 to 8 going from AMA to SMB. If you are upgrading from AMA to SMB, you have to change it manually

  • Note when building AndroidAPS 2.0 apk: Configuration on demand is not supported by the current version of the Android Gradle plugin! Als je een foutmelding krijgt die gaat over “on demand configuration” kun je het volgende doen:

    • Open the Preferences window by clicking File > Settings (on Mac, Android Studio > Preferences).

    • In the left pane, click Build, Execution, Deployment > Compiler.

    • Uncheck the Configure on demand checkbox.

    • Click Apply or OK.

Tabblad Overzicht

  • Top ribbon gives access to suspend/disable loop, view/adjust profile and to start/stop temporary targets (TTs). Standaardinstellingen voor Tijdelijke Streefdoelen. De nieuwe Hypo Streefdoel optie is een hoog Tijdelijk Streefdoel dat voorkomt dat de loop te agressief corrigeert voor de hypo-koolhydraten.

  • Treatment buttons: old treatment button still available, but hidden by default. Je kunt zelf aangeven welke knoppen zichtbaar zijn. New insulin button, new carbs button (including eCarbs/extended carbs)

  • Colored prediction lines

  • Option to show a notes field in insulin/carbs/calculator/prime+fill dialogs, which are uploaded to NS

  • Updated prime/fill dialog allows priming and creating careportal entries for site change and cartridge change

Smartwatch

  • Separate build variant dropped, included in regular full build now. Om de bolus bediening te gebruiken vanaf het horloge moet deze instelling op de telefoon worden ingeschakeld

  • Wizard now only asks for carbs (and percentage if enabled in watch settings). Op de telefoon kan worden in de instellingen worden geconfigureerd welke parameters worden meegenomen in de berekening

  • confirmations and info dialogs now work on wear 2.0 as well

  • Added eCarbs menu entry

Nieuwe plugins

  • PocTech app as BG source

  • Dexcom patched app as BG source

  • oref1 sensitivity plugin

Overig

  • App now uses drawer to show all plugins; plugins selected as visible in config builder are shown as tabs on top (favourites)

  • Overhaul for config builder and objectives tabs, adding descriptions

  • New app icon

  • Lots of improvements and bugfixes

  • Nightscout-independent alerts if pump is unreachable for a longer time (e.g. depleted pump battery) and missed BG readings (see Local alerts in settings)

  • Option to keep screen on

  • Option to show notification as Android notification

  • Advanced filtering (allowing to always enable SMB and 6h after meals) supported with patched Dexcom app or xDrip with G5 native mode as BG source.