# Настройки

- **Open preferences** by clicking the three-dot menu on the top right side of the home screen.

![Open preferences](../images/Pref2020_Open2.png)

- You can jump directly to preferences for a certain tab (i.e. pump tab) by opening this tab and clicking Plugin preferences.

![Open plugin preferences](../images/Pref2020_OpenPlugin2.png)

- **Sub-menus** can be opened by clicking the triangle below the sub-menu title.

![Open submenu](../images/Pref2020_Submenu2.png)

- With the **filter** on top of the preferences screen you can quickly access certain preferences. Just start typing part of the text you are looking for.

![Preferences filter](../images/Pref2021_Filter.png)

```{contents}
:backlinks: entry
:depth: 2
```

(Preferences-general)=
## General

![Preferences > General](../images/Pref2020_General.png)

**Units**

- Set units to mmol/l or mg/dl depending on your preferences.

**Language**

- New option to use phone's default language (recommended).

- In case you want **AAPS** in a different language than your standard phone language, you can choose from a broad variety.

- If you use different languages, you might sometimes see a language mix. This is due to an android issue where overriding the default android language sometimes doesn't work.

**Patient name**

- Can be used if you have to differentiate between multiple setups (i.e. two T1D kids in your family).

(Preferences-protection)=
### Защита

![Preferences > General - Protection](../images/Pref2020_General2.png)

(Preferences-master-password)=
#### Главный пароль

Mandatory to be able to [export settings](../Maintenance/ExportImportSettings.md) as they are encrypted from version 2.7.

**Biometric protection may not work on OnePlus phones. This is a known issue of OnePlus on some phones.**

![Установите главный пароль](../images/MasterPW.png)

#### Защита настроек

- Protect your settings with a password or phone's biometric authentication (i.e. [child is using **AAPS**](../RemoteFeatures/RemoteMonitoring.md)). If you enable this feature, you will be prompted for authentication each time you want to access any Preferences related view.

- Custom password should be used if you want to use master password just for securing [exported settings](../Maintenance/ExportImportSettings.md), and use a different one for editing the preferences.

- If you are using a custom password click on line "Settings password" to set password as described [above](#Preferences-master-password).

![Защита](../images/Pref2020_Protection.png)

#### Защита приложения

If the app is protected, you must enter the password or use the phone's biometric authentication to open **AAPS**.

**AAPS** will shut down immediately if a wrong password is entered - but will still run in background if it was previously opened successfully.

#### Защита болюсов

- Bolus protection might be useful if **AAPS** is used by a small child and you [bolus via SMS](../RemoteFeatures/SMSCommands.md).

- В примере ниже вы видите запрос на биометрическую защиту. If biometric authentication does not work, click in the space above the white prompt and enter thr master password.

![Prompt biometric protection](../images/Pref2020_PW.png)

#### Password and PIN retention

Define how long (in seconds), the preferences or bolus functionalities remain unlocked after you successfully enter the password.

(Preferences-skin)=
#### Тема оформления
Можно выбрать одну из четырех тем оформления:

![Select skin](../images/Pref2021_SkinWExample.png)

'Low resolution skin' comes with shorter labels and age/level removed to have more available space on a very low resolution screen.

Difference between the other skins depends on the phone's display orientation:

##### Портретная ориентация

- Темы **Исходная тема оформления** и **Кнопки всегда в нижней части экрана** идентичны
- **Large Display** has an increased height for all graphs compared to other skins

##### Альбомная ориентация

- При использовании **Исходной темы оформления** и темы **Большой экран**придется прокручивать экран вниз, чтобы увидеть кнопки в нижней части экрана

- **Large Display** has an increased height for all graphs compared to other skins

![Skins depending on phone's display orientation](../images/Screenshots_Skins.png)

## Общие замечания

In the **Overview** section, you can define the preferences for the home screen.

![Preferences > Overview](../images/Pref2020_OverviewII.png)

### Не отключать экран

Option 'Keep screen on' will force Android to keep the screen on at all times. This is useful for presentations etc. But it consumes a lot of battery power. Therefore, it is recommended to connect the smartphone to a charger cable.

(Preferences-buttons)=
### Кнопки

- Define which buttons are visible on the bottom of your home screen.

![Preferences > Buttons](../images/Pref2020_OV_Buttons.png)

- The **Increment** options allow you to define the amount for the three buttons in the carb and insulin dialogues, for easy entry.

![Preferences > Buttons > Insulin](../images/Pref2020_OV_Buttons2.png)

![Preferences > Buttons > Carbs](../images/Pref2020_OV_Buttons3.png)

(Preferences-quick-wizard)=
### Мастер быстрых настроек

Create customized buttons for certain standard meals or snacks which will be displayed on the home screen. Useful for standard meals frequently eaten.

For each button, you define the carbs and calculation method for the bolus. Then, you define during which time period the button will be visible on your home screen - just one button per period. The button will not be visible if outside the specified time range or if you have enough IOB to cover the carbs defined in the QuickWizard button. If different times are specified for the different meals you will always have the appropriate standard meal button on the home screen, depending on the time of day.

![Preferences > Quick Wizard Button Setup](../images/Pref2020_OV_QuickWizard.png)

If you click the quick wizard button **AAPS** will calculate and propose a bolus for those carbs based on your current ratios (considering blood glucose value or insulin on board if set up).

Это предложение должно быть подтверждено перед подачей инсулина.

![Preferences > Quick Wizard Button](../images/Pref2020_OV_QuickWizard2.png)

(Preferences-default-temp-targets)=
### Временные цели по умолчанию

[Temporary targets (TT)](../DailyLifeWithAaps/TempTargets.md) allow you to change your blood glucose target for a certain time period. When setting a default TT, you can easily change your target for activity, eating soon etc.

Here you can change the target and the duration for each predefined TT. Preset values are:

* Eating soon: target 72 mg/dL / 4.0 mmol/l, duration 45 min
* Activity: target 140 mg/dL / 7.8 mmol/l, duration 90 min
* Hypo: target 125 mg/dL / 6.9 mmol/l, duration 45 min

![Preferences > Default temp targets](../images/Pref2020_OV_DefaultTT.png)

Learn how to [activate Temp Targets here](#TempTargets-where-can-i-select-a-temp-target).

### Заполнить стандартное количество инсулина

If you want to fill the tube or prime cannula through **AAPS** you can do this through the [**Actions** tab](#screens-action-tab).

В этом диалоге можно задать предустановленные значения. Choose the default amounts of the three buttons in fill/prime dialogue, depending on the length of your catheter.

(Preferences-range-for-visualization)=
### Диапазон визуализации

Choose the high and low marks for the BG-graph on **AAPS** overview and smartwatch. It is only the visualization, not the target range for your BG. Example: 70 - 180 mg/dl or 3.9 - 10 mmol/l

![Preferences > Range for visualization](../images/Pref2020_OV_Range2.png)

### сокращенные имена табул

Useful to see more tab titles on screen.

Например, вкладка 'Помощник болюса OpenAPS AMA' становится 'OAPS', 'ЦЕЛЕВЫЕ ЗНАЧЕНИЯ ГК' становится 'ЦЕЛИ' и т. д.

![Preferences > Tabs](../images/Pref2020_OV_Tabs.png)

(Preferences-show-notes-field-in-treatments-dialogs)=
### Показывать поле примечаний в диалогах терапии

Дает возможность добавить короткие примечания к терапии (мастер болюса, углеводы, инсулин...)

![Preferences > Notes in treatment dialogs](../images/Pref2020_OV_Notes.png)

(Preferences-status-lights)=
### Индикаторы состояния

Status lights give a visual warning for:

- сколько времени отработал сенсор
- Sensor battery level for certain smart readers (see [screenshots page](#screens-sensor-level-battery) for details).
- сколько времени прошло с момента установки резервуара
- об уровне заполнения резервуара (в единицах)
- сколько времени прошло с момента установки канюли
- Батарея помпы работает... (Возраст батареи помпы)
- Уровень заряда батареи помпы (%)

If the warning threshold is exceeded, values will be shown in yellow. If the critical threshold is exceeded, values will be shown in red.

The last option allows you to import those settings from Nightscout if defined there. See [Nightscout documentation](https://nightscout.github.io/nightscout/setup_variables/#age-pills) for more information.

![Preferences > Status Lights](../images/Pref2020_OV_StatusLights2.png)

(Preferences-deliver-this-part-of-bolus-wizard-result)=
### Deliver this part of bolus wizard result

Set the [default percentage](#AapsScreens-section-j) of the bolus calculated when using the bolus wizard.

Default is 100%: no correction. Even when setting a different value here, you can still change each time you use the bolus wizard. If this setting is 75 % and you had to bolus 10U, the bolus wizard will propose a meal bolus of only 7.5 units.

When using [SMB](#objectives-objective9), many people do not meal-bolus 100% of needed insulin, but only a part of it (e.g. 75 %) and let the SMB with UAM (Unattended Meal Detection) do the rest. Using a value lower than 100% here can be useful:
* for people with slow digestion: sending all the bolus upfront can cause hypo because the insulin action is faster than the digestion.
* to leave more room to **AAPS** to deal by itself with **BG rise**. In both cases, **AAPS** will compensate for the missing part of the bolus with SMBs, if/when deemed adequate.

### Enabled bolus advisor

![Bolus Advisor](../images/BolusAdvisor.png)

When enabled, when you use the bolus wizard as you are in hyperglycemia, you will get a warning, prompting you if you wish to pe-bolus and eat later, when your **BG** gets back in range.

### Enabled bolus reminder

% todo

(Preferences-advanced-settings-overview)=
### Расширенные настройки (обзор)

![Preferences > Advanced Settings](../images/Pref2021_OV_Adv.png)

#### Суперболюс

Опция для включения суперболюса в мастере.

[Суперболюс](https://www.diabetesnet.com/diabetes-technology/blue-skying/super-bolus/) - это идея "заимствовать" некоторое количество инсулина от базальной скорости следующих двух часов, чтобы предотвратить резкие пики. It is different from *super micro bolus*!

Use with caution and do not enable it until you learn what it really does. Basically, the basal for the next two hours is added to the bolus and a two hour zero-temp activated. **AAPS looping functions will be disabled - so use with care! If you use SMB **AAPS** looping functions will be disabled according to your settings in ["Max minutes of basal to limit SMB to"](#Open-APS-features-max-minutes-of-basal-to-limit-smb-to), if you do not use SMB looping functions will be disabled for two hours.** Details on super bolus can be found [here](https://www.diabetesnet.com/diabetes-technology/blue-skying/super-bolus).

## Безопасность терапии

(preferences-patient-type)=
### Тип пациента

- Ограничения безопасности устанавливаются на основе возраста, который вы выбираете в этом параметре.
- Если вы начинаете достигать верхних ограничений (как например максимальный болюс) пора подняться на один шаг вверх (например, от ребенка перейти к подростку - прим. перев.).
- It's a bad idea to select higher than real age because it can lead to overdosing by entering the wrong value in the insulin dialog (by skipping the decimal dot, for example).
- If you want to know the actual numbers for these hard-coded safety limits, scroll to the algorithm feature you are using on [this page](../DailyLifeWithAaps/KeyAapsFeatures.md).

### Max allowed bolus

- Defines the maximum amount of bolus insulin, in insulin units, that **AAPS** is allowed to deliver at once.
- Эта настройка существует как ограничение безопасности для предотвращения подачи чрезмерного болюса из-за случайного ввода или ошибки пользователя.
- Рекомендуется установить это значение как разумный предел, приблизительно соответствующий максимальному количеству болюсного инсулина, который вы когда-либо можете подать на еду или на коррекцию.
- Это ограничение также налагается на результаты калькулятора болюса.

### Max allowed carbs

- Defines the maximum amount of carbs, in grams, that **AAPS** bolus calculator is allowed to dose for.
- Эта настройка существует как ограничение безопасности для предотвращения подачи чрезмерного болюса из-за случайного ввода или ошибки пользователя.
- Рекомендуется установить это значение как разумный предел, приблизительно соответствующий максимальному количеству углеводов, которые вам когда-либо понадобится на еду.

## Замкнутый цикл

(Preferences-aps-mode)=
### Режим APS
Switch between Open Loop, Closed Loop and Low Glucose Suspend (LGS).

![Config builder - loop mode](../images/ConfigBuilder_LoopLGS.png)

(Preferences-pen-loop)=
#### Open Loop
**AAPS** continuously evaluates all available data (IOB, COB, BG...) and makes treatment suggestions (temporary basal rates) on how to adjust your therapy if necessary.

The suggestions will not be executed automatically (as in closed loop). The suggestions have to be enacted by the user manually into the pump (if using virtual pump) or by using a button if **AAPS** is connected to a real pump.

This option is for getting to know how **AAPS** works or if you are using an unsupported pump. You will be in Open Loop, no matter what choice you make here, until the end of **[Objective 5](#objectives-objective5)**.

(preferences-closed-loop)=
#### Closed Loop

**AAPS** continuously evaluates all available data (IOB, COB, BG...) and automatically adjusts the treatment if necessary (_i.e._ without further intervention by you) to reach the set [target range or value](#profile-glucose-targets) (bolus delivery, temporary basal rate, insulin switch-off to avoid hypo etc.).

The Closed Loop works within numerous safety limits, which can be set individually.

Closed Loop is only possible if you are in **[Objective 6](#objectives-objective6)** or higher and use a supported pump.

#### Low Glucose Suspend (LGS)

In this mode, [maxIOB](#Open-APS-features-maximum-total-iob-openaps-cant-go-over) is set to zero.

This means that if blood glucose is dropping, **AAPS** can reduce the basal for you. But if blood glucose is rising, no automatic correction will be made. Your basal rates will remain the same as defined in your current **Profile**. Only if basal IOB is negative (from a previous Low Glucose Suspend) additional insulin will be given to lower **BG**.

(Preferences-minimal-request-change)=
### Minimal request change

When using **Open loop**, you will receive notifications every time **AAPS** recommends adjusting the basal rate. To reduce the number of notifications you can either use a [wider bg target range](#profile-glucose-targets) or increase the percentage of the minimal request rate. Он определяет относительное изменение, необходимое для активации уведомления.

## Улучшенный ассистент приема пищи (AMA) или Супер Микро Болюс (SMB)

Depending on your settings in [config builder](../SettingUpAaps/ConfigBuilder.md) you can choose between three algorithms:

- [Advanced meal assist (OpenAPS AMA)](#Open-APS-features-advanced-meal-assist-ama) - state of the algorithm in 2017
- [Super Micro Bolus (OpenAPS SMB)](#Open-APS-features-super-micro-bolus-smb) - most recent algorithm recommended for beginners
- [Dynamic ISF](../DailyLifeWithAaps/DynamicISF.md) - released in 2024, available starting at **[Objective 11](#objectives-objective11)**

### OpenAPS AMA

All the settings for OpenAPS AMA are described in the dedicated section in [Key AAPS Features > Advanced Meal Assist (AMA)](#Open-APS-features-advanced-meal-assist-ama).

(Preferences-openaps-smb-settings)=
### OpenAPS SMB

All the settings for OpenAPS SMB are described in the dedicated section in [Key AAPS Features > Super Micro Bolus (SMB)](#Open-APS-features-super-micro-bolus-smb).

### Dynamic ISF

All the settings for Dynamic ISF are described in the dedicated section in [Dynamic ISF](../DailyLifeWithAaps/DynamicISF.md).

## Настройки усваиваемости

(Preferences-min_5m_carbimpact)=
### min_5m_carbimpact

The algorithm uses BGI (blood glucose impact) to determine when [carbs are absorbed](../DailyLifeWithAaps/CobCalculation.md).

At times when carb absorption can’t be dynamically worked out based on your blood's reactions, **AAPS** inserts a default decay to your carbs. Basically, it is a failsafe. This value is only used during gaps in **CGM** readings or when physical activity “uses up” all the blood glucose rise that would otherwise cause **AAPS** to decay COB.

Говоря по-простому, алгоритм "знает" как *должна* вести себя ГК при воздействии дозы инсулина и т. п. При положительном отклонении от ожидаемого поведения некоторые углеводы поглощаются/исчезают. Большие изменения=много углеводов и т. д.

По умолчанию величина min_5m_carbimpact определяет поглощение углеводов за 5 минут. Дополнительную информацию см. в документации [OpenAPS](https://openaps.readthedocs.io/en/latest/docs/While%20You%20Wait%20For%20Gear/preferences-and-safety-settings.html?highlight=carbimpact#min-5m-carbimpact).

Стандартное значение для AMA 5, для SMB это 8.

График COB на главном экране показывает, когда используется min_5m_impact в виде оранжевого круга в верхней части.

![COB graph](../images/Pref2020_min_5m_carbimpact.png)

### Meal max absorption time

Если вы часто едите блюда с высоким содержанием жиров или белка, вам следует увеличить время усвоения пищи.

### Расширенные настройки - коэффициент autosens

![Настройки усваиваемости](../images/Pref2020_Absorption.png)

- Define min. and max. [autosens](#Open-APS-features-autosens) ratio.
- Обычно стандартные значения (макс. 1.2 и мин. 0.7) не должны меняться.

## Pump

### BT Watchdog

Activate BT watchdog if necessary (e.g. for Dana pumps). It switches off bluetooth for one second if no connection to the pump is possible. This may help on some phones where the bluetooth stack freezes.

## Настройки помпы

The options here will vary depending on which pump driver you have selected in [Config Builder](#Config-Builder-pump).  Pair and set your pump up according to the [pump related instructions](../Getting-Started/CompatiblePumps.md).

## Tidepool

More information on the dedicated [Tidepool](../SettingUpAaps/Tidepool.md) page.

(Preferences-nsclient)=
## клиент NS

![клиент NS](../images/Pref2020_NSClient.png)

Оригинальный протокол коммуникации, может использоваться с более ранними версиями Nightscout.

- Создайте свой сайт *Nightscout URL* (напр. <https://yoursitename.yourplaform.dom>).
- **Убедитесь, что URL-адрес БЕЗ /api/v1/ в конце.**
- *[API secret](https://nightscout.github.io/nightscout/setup_variables/#api-secret-nightscout-password)* (12-значный пароль записан в переменных Nightscout).
- This enables data to be read and written between both the Nightscout website and **AAPS**.
- Если вы застряли на Цели 1, еще раз проверьте поля с адресом и паролем на наличие опечаток.

## Клиент NSV3

![Клиент NSV3](../images/Pref2024_NSClientV3.png)

[New protocol introduced with AAPS 3.2.](#Important-comments-on-using-v3-versus-v1-API-for-Nightscout-with-AAPS) Safer and more efficient.

```{admonition} V3 data uploaders
:class: warning

When using NSClientV3, all uploaders must be using the API V3. Since most are not compatible yet, this means **you must let **AAPS** upload all data** (BG, treatments, ...) to Nightscout and disable all other uploaders if they're not V3 compliant.
```

- Создайте свой сайт *Nightscout URL* (напр. <https://yoursitename.yourplaform.dom>).
- **Убедитесь, что URL-адрес БЕЗ /api/v1/ в конце.**
- In Nightscout, create an *[Admin token](https://nightscout.github.io/nightscout/security/#create-a-token)* (requires [Nightscout 15](https://nightscout.github.io/update/update/) to use the V3 API) and enter it in the **NS access token** (not your API Secret!).
- This enables data to be read and written between both the Nightscout website and **AAPS**.
- Если вы застряли на Цели 1, еще раз проверьте поля с адресом и паролем на наличие опечаток.
- Оставьте Подключение к websocket включенным (рекомендуется).

### Синхронизация

Synchronization choices will depend on the way you will want to use **AAPS**.

You can select which data you want to [upload and download to or from Nightscout](#Nightscout-aaps-settings).

### Опции оповещения

![Опции оповещения](../images/Pref2024_NSClient_Alarms.png)

- Опции звуковых оповещений позволяют выбрать оповещения Nightscout по умолчанию для использования через приложение. **AAPS** will alarm when a Nightscout alarm triggers.
- Для того, чтобы работали оповещения, следует настроить значения переменных для Чрезвычайно Высокой, Высокой, Низкой и Чрезвычайно Низкой ГК в переменных [Nightscout](https://nightscout.github.io/nightscout/setup_variables/#alarms).
- Они будут работать только во время подключения к Nightscout и предназначены для родителей/опекунов.
- If you have the **CGM** source on your phone (i.e. xDrip+ or BYODA) then use those alarms instead of Nightscout Alarms.
- Create notifications from Nightscout [announcements](https://nightscout.github.io/nightscout/discover/#announcement) will echo Nightscout announcements in the **AAPS** notifications bar.
- Вы можете изменять порог срабатывания оповещений при отсутствии данных от Nightscout в течение определенного времени.

### Параметры подключения

![NSClient connection settings](../images/ConfBuild_ConnectionSettings.png)

- Настройки подключения определяют, когда включено соединение с Nightscout.
- Ограничьте загрузку в Nightscout только через Wi-Fi или даже через Wi-Fi SSID.
- If you want to use only a specific Wi-Fi network you can enter its Wi-Fi SSID.
- Несколько идентификаторов SSID разделяются точкой с запятой.
- Чтобы удалить все SSID оставьте поле пустым.

(Preferences-advanced-settings-nsclient)=
### Расширенные настройки (Клиент NS)

![NS Client advanced settings](../images/Pref2024_NSClientAdv.png)

Options in advanced settings are self-explanatory.

## СМС-коммуникатор

More information on the dedicated [SMS Commands](../RemoteFeatures/SMSCommands.md) page.

## Автоматизация

Select which location service shall be used:

- Use passive location: **AAPS** only takes locations if other apps are requesting it
- Использовать расположение сети: расположение вашего Wifi
- Используйте локатор GPS (Внимание! Может привести к чрезмерной разрядке аккумулятора!)

## Локальные оповещения

![Локальные оповещения](../images/Pref2020_LocalAlerts.png)

Настройки самоочевидны.

## Отбор данных

![Отбор данных](../images/Pref2020_DataChoice.png)

You can help develop **AAPS** further by sending crash reports to the developers.

## Параметры обслуживания

![Параметры обслуживания](../images/Pref2020_Maintenance.png)

Standard recipient of logs is <logs@aaps.app>.

## Проект Open Humans

Вы можете помочь науке, поделившись данными с исследовательскими проектами! Details are described on the [Open Humans page](../SupportingAaps/OpenHumans.md).

In Preferences, you can define when data shall be uploaded
- only if connected to Wi-Fi
- только при зарядке