Diaconn G8 İnsülin Pompası¶
İnsülin Pompası Bluetooth Eşleştirme¶
Click on the hamburger menu in the top left corner.
Click on Config Builder.
After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
Choose Selected pump.
Select your insulin pump’s model number once it appears in the list.
There are two options to check your model number:
Pompanın arkasındaki SN numarasının son 5 hanesi.
Click on O button > Information > BLE > Last 5 digits.
{image} ../images/DiaconnG8/DiaconnG8_06.jpg :alt: check model no.Once you select your pump, a window appears asking for a pin code. Bağlantıyı tamamlamak için pompanızda görüntülenen pin numarasını girin.
Pompa durum kontrolü ve günlük senkronizasyonu¶
Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
Bluetooth Sorun Giderme¶
What to do in the case of an unstable Bluetooth connection with the pump.
Yöntem 1) AAPS uygulamasını yeniden başlattıktan sonra pompayı tekrar kontrol edin.¶
Click on the 3 dots button on the top right.
Click on Exit.
Yöntem 2) İlk yöntem işe yaramazsa, Bluetooth bağlantısını kesin ve ardından yeniden bağlanın.¶
Press and hold the Bluetooth button at the top for about 3 seconds.
Click on the Setting button on the paired Diaconn G8 Insulin pump.
Unpair.
Repeat the Bluetooth pairing process for the pump (see above).
Daha fazla bilgi¶
Diaconn G8 İnsülin pompası seçenek ayarları¶
Config manager > pump > Diaconn G8 > Settings
DIACONN G8 at the top> 3 dots button on the top right > Diaconn G8 Preferences
If the Log reservoir change option is activated, the relevant details are automatically uploaded to the careportal when an “Insulin Change” event occurs.
If the Log needle change option is activated, the relevant details are automatically uploaded to the careportal when a “Site Change” event occurs.
If the Log tube change option is activated, the relevant details are automatically uploaded to the careportal when a “Tube Change” event occurs.
If the Log battery change option is activated, the relevant details are automatically uploaded to the careportal when a “Battery Change” event occurs, and the PUMP BATTERY CHANGE button in the ACTION tab is deactivated. (Not: Pili değiştirmek için lütfen önce devam eden tüm enjeksiyon işlevlerini durdurun.)
Yayma Blosu fonksiyonu¶
If you use extended bolus it will disable closed loop.
See this page for details why extended bolus does not work in a closed loop environment.